|
-
»
Channels
» Profiles, Mouldings, Special Shapes & Sections
- Angles, Angle Irons,
L-Shapes & V-Shapes
-
»
Specialty Tubing
-
»
Rings, Rims, Clamps, Flanges, Hoops & Bezels
- Holders, Mountings, Edgings, Trim, & Retainers
- Railings & Brackets
- Z-Bars, Purlins
-
»
Frames & Framing, Diffusers, Grills & Baffels
- Panels, Fins & Plates
-
»
Tracks, Ducts, Rails & Slides
- Stainless Steel Track Caps & Covers
- Caps, Covers, Cladding & Flashings
- Hinging: Louvers, Blades, Slats, Panels, & Beads
- Slats, Strips, Gaskets, Battens & Curved Tape
-
»
Bars & Sections: T, H, W & Double Channels
-
»
Wire Products: Strips, Straps & Rings
-
»
Other Products
- These Profiles Can Be Made Into:
- Shelf Support Tubing
- Barricade Legs and Supports
- Type 1 Barricade Legs and Parts
- Type 2 Barricade Legs and Parts
- Type 3 Barricade Stands
- Shade Rollers
- Hem Bar, Bottom Bar & Hem-Line Channels
- Price Card Mouldings
- Towel Bars
- Curtain Rods
- Shower Rods
- Closet Rods, & Wardrobe Bars
- Drawer Slides
- Drip Edges, Caps & Flashing
- Fence Rails, Posts, Pickets & Stiffeners
- Din Rails, Bus Bars Wireways, Cable Trays, & Bus Ducts
- Heat Transfer Plates
- Scuff Plates, Roof Bows, & Hat Posts
- PVC Rail, Frame, Tubing & Pipe Stiffeners and Reinforcements
- Sink Mouldings, Grip Rims, & Prong Strips
- Security Storm Door Frames
- Stampings
- R.V. & Car Luggage Rack Tubing
- Mirror Frames
- Reflector Panels
- Snap-On Mouldings
- Storm Window & Screen Frames
- Handles
- Siding Trim
- Roll Up Slats
- Wall Studs & Partition Framing
- Sink Legs
- Industries Served
-
»
Resources & Links
- See Online Catalog
- Gwenco Mfg
- Oak Rite Mfg. Corp.
|
|
|
|
|
Bathroom, Restroom, Lavatory, & Shower Rods
Hotel Shower Rods, Shower Rods for new Building Construction, existing and new Apartments, Condos and
as Consumer replacement is the industry market we serve. Towel Bars are also produced for this industry.
The standard Bathroom Rods we manufacture are provided in cartons of which there are 50 pcs. per carton.
12 pcs can also be provided by special request. The cartons are then placed on a pallet in stacked rows
at a typicalvolume od 1,000 shower rods per pallet. Are Stainless Shower Curtain Rods and Aluminum Shower
Curtain Rods are shipped from stock when ordered in standard lengths of 5ft and 6ft. This provides the
fastest possible delivery which can be a week or less from time of order when needed. However, our
Bathroom Shower Rods and Towel Bars can also be requested in custom lengths in as short as 6" all
the way up to 32ft long.
Stainless Steel Shower Rods are requested most often due to price, and extra strength that each
Stainless Steel Shower Rod provides, while Aluminum Shower Rods are preferred for higher corrosion resistance and replaceability.
When close to ocean salty air environments, special orders can be placed for more corrosive resistant
stainless alloys such as T304 and T316. An even stronger alloy would be T321 when it becomes available
without a minimum stainless mill order. Artificial Wood Tubes can also be provided for high corrosion
restance as a Woodgrain Vinyl Cladding on a Steel or Stainless Steel base used in this artificial Wood
Tubing. Vinyl laminate will also last much longer than real wood from hanger marks, etc., before
replacement is needed. Actually any tube may be given a vinyl clasdding of your choice however these are
custom orders at greater expense. The Vinyl Cladding surface may also be embossed at extra cost. Embossed
and plain White Vinyl Shower Rods has also been popular.
Lavatory Legs is a term given for Hexagonal Sink Legs we provide, in standard 7/8" hex as well as special
order 3/4" hex and 5/8" hex. These Hexagonal Stainless lock seam tubes also become an ornate Decorative
Towel Rod for showers and baths. Contact us today for a quote on Hotel Shower Rods, Bathroom Shower Rods,
Decorative Towel Rod, Wood Tubes, Wood Tubing, Lavatory Legs and Stainless Steel Shower Rods.
Parts are produced to order and stock reserve only kept for large blanket order shipping releases. Existing samples may or may not be available. Prototypes for large orders are feasible.
|
|
|
|
|
|
|