Towel Bars

Shower Tracks and Shower Rails
Shower Rods
Shower Poles and Shower Bars
Sink Legs
Lock Seam Tubing & Lock Seam Tubs
Special Shaped Tubing

Johnson Bros. manufactures a wide selection of Towel Bar sizes, materials and finishes. Standard sizes, materials and finishes become the least expensive. Custom sizes, materials or finishes will still be low priced, but not as low as the standard unless your quantity desired is high. You will see in the photos included, some of the standard sizes and materials we manufacture are shown as:

A: 3/4 sq. Brite Aluminum
B: 3/4 sq. Brite Stainless
C: 3/4 sq. Satin Stainless
D: 5/8 sq. Brite Aluminum
E-1:5/8 sq. Brite Stainless
E-2:5/8 sq. Satin Stainless (just added this year)
F: 3/4 rd. Brite Stainless Towel Bars
G: 3/4rd. Satin Stainless Towel Bars

This photo shows a protective coating that is
removed by the customer right before installation
of these Towel Bars.

Lavatory legs, hex lockseam tubing & towel bars, square & round

These Standard Towel Rails will be supplied as 18, 24, 30, 36 length or width as installed on a wall. Different Towel Rod Lengths can be made from 6 long to any length greater than that. There may be a slight price increase depending on quantity for custom lengths and special packaging if required and perhaps not. There will be a Strippable PVC Covering that is easy to remove just before assembly so there are no forming marks, handling marks, packaging marks or any other marks before your Towel Rail is installed. The photos included show examples of this. If preferred, paper sleeving can be used instead with a small price increase. There is a one carton minimum order of about 50 tubes, depending on the size required. As you can see in the photos here, the standard parts are round and square Stainless Steel Towel Bars and Aluminum Towel Bars with a bright, (and a satin finish in stainless), also provided. Thicknesses for Standard Sizes generally run .015 for Aluminum and .012 for stainless. Most other thicker material can also be manufactured here easily.

From left to right: 7/8 hex Stainless Sink Legs, 3/4 Round Satin Stainless Towel Bar and 3/4 Round Brite Stainless Towel Bar

Since the Standard Towel Bar descriptions have been summarized above, we can tell you about Custom Towel Bars Johnson Bros. has produced or can produce. Some of the special Towel Bar most often required are a: Chrome Towel Bar, Bronze Towel Bar, as well as White Towel Bars, Black Towel Bars, Brite and Antique Polished and Lacquered Solid Brass Towel Bars, Brushed Bronze Anodized Aluminum Towel Bars, Bright and Satin Polished  Brass and Antique Brass Anodized Aluminum Towel Bars, Bronze Anodized Aluminum Towel Bars, Solid Bronze Towel Bars, Bright Chrome Plated Brass Towel Bars and more. Any material and finish is open for discussion at Johnson Bros.. Availability of special requirements is greatly reflected by more quantity. If the quantity you need is high enough, who knows? It may even become one of our Standard offerrings. Johnson Bros. can also manufacture Special Sized Towel Bars such as Hexagon Towel Bar Tubing, Rectangular Towel Bar Tubing, Oval Towel Bar Tubing and other Special Shaped Tubing Styles for use as Towel Bars.

There are many uses that our Towel Bars can perform. Here are a few examples where a Towel Rod may be used: Bathroom Towel Bars, Kitchen Towel Bars, Shower Door Towel Bars, Hot Tub Towel Bars, and even Paper Towel Bars, Hand Towel Bars, Inside Cabinet Door Towel Bars, Bath Room Cabinet Towel Bars inside or out, Bath Room Door inside towel Bars, Bath Room Wall or Wall Rack Towel Bars, Bathroom Drawer Pull Bars and more.

Whether it is a Kitchen Towel Bar, Bathroom Towel Bar, Shower Door Towel Bar, Hot Tub Towel Bar, Sauna Towel Bar or any other use, prices are the same if they are our one of our Standard Styles. Only a lower quantity may cause a price change on standard styles.

We should make clear that based on volume, Johnson Bros. Towel Bars are not shipped with end brackets without a high volume special arrangement negotiated, though we can find them for you with lower volume if needed. A Replacement Towel Bar using our standard styles will, of course, not require the end brackets.

View more products here: Lock Seam Tubing & Lockseam Tubes

Parts are produced to order and stock reserve only kept for large blanket order shipping releases. Existing samples may or may not be available. Prototypes for large orders are feasible.

PDF  |  LS-001 |   CAD File	PDF  |  845 |   CAD File
PDF  |  082009-01 |   CAD File	PDF  |  082009-02 |   CAD File
PDF  |  082009-03 |   CAD File	PDF  |  592 |   CAD File
PDF  |  578 |   CAD File